CQ TDW-S SERIES slag remover Coagulant
TDW-S SERIES Slag REMOVER/Coagulant uses the self-developed technology, swelling the raw materials in proper temperature and chilling the heated material.
The technology can make sure the slag-off performance and greatly reduce the dust. TDW slag remover/coagulant can effectively remove slag and avoid of immersing other sundries into the casting parts during smelting.
Practice has proved that the TDW-S SERIES slag remover coagulant has achieved the international advanced level.
We devote ourselves to create the first national brand.
PRODUCT SPECIFICATION
| % SiO2 |
%Al2O3 |
%Fe2O3 |
% Na2O |
% K2O |
% Ca O |
% Mg O |
| 69-74.5 |
11-19 |
0.5-1.9 |
1.8-3.0 |
3.5-4.5 |
1.0-2.0 |
0.18-0.28 |
Model NO. (Here only partial models are displayed. This products accept customization.)
| Model NO. |
Particle Size |
Application
|
| TDW-S2 |
8-15mesh |
Large cast steel and stainless steel |
| TDW-S3 |
15-30mesh |
Cast steel |
| TDW-S4 |
30-50mesh |
Cast iron |
| TDW-S5 |
50-70mesh |
Casting ladle, low temperature cast iron |
PRODUCT FEATURES:
1. Slag accretion fast and remove slag just for one time, remove slag completely
2. No damage to the furnace wall and the ladle, reduce rare metal leaving.
3.Eliminate slag inclusions, increase rate of finished goods and reduce cost of casting
4.Coefficient of expansion is high;slag accretion fast and heat preservation effectively
5.TDW Slag remover/coagulant doesn't burst or splash and do not affect human health
6. higher cost performance, stable quality; be good for cost saving.
USAGE&DOSAGE
The usage result of slag remover coagulant depends to a great extent on the correct use method.
We recommend that engineers or workers must strictly control the usage amount.
The process of adding slag remover coagulant is the process of removing slag and is also the processing of slagging to the metal liquid.
When amount the of usage is too much, the slag remover/coagulant can also change to nonmetallic impurities, thus increasing labor intensity and extending the time of removing slag.
To avoid the above problems and give full play to our slag remover/coagulant effect, please minimize the amount of usage.
Normally the application amount is no more than 1.2 litre per ton.
*We get this data from that 5-ton intermediate frequency smelting ductile iron.
PACKAGE AND STORAGE:
Package: 20kg/25kg woven bag/paper bag
1000kg ton bag/wrapping pallet
20-22MT/1*20FCL container
Storage: water proof and moisture proof.
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, you are welcome to visit our company.
Audited Supplier 
){kind=link}